modulus of elasticity of pvc

Young Modulus for some Common Materials of Elasticity Australia ...

Material, Young's modulus (modulus pf elasticity) -E-, Ultimate Tensile Strength -S- (10<sup>6</sup> N/m<sup>2</sup>, MPa), Yield Strength -S- (10<sup>6</sup> N/m<sup>2</sup>, MPa). (10<sup>6</sup> psi), (10<sup>9</sup> N/m<sup>2</sup>, GPa). ABS plastics, 2.3, 40. Acrylic, 3.2, 70. Aluminum, 10.0, 69, 110, 95.

Mechanical Properties of Rigid Foam PVC-Clay Nanocomposites

Whereas, tensile strength and modulus of elasticity showed some deterioration with the presence of nanoclay in the rigid pvc foam. On the other hand, impact strength and specific flexural strength did not show any significant changes.

PVC Pipe Engineering Properties - North American Pipe

Thermal De-Rating Factors. The Tensile Yield Strength, Hydrostatic Design Basis, Tensile modulus of elasticity, and Flexural Yield Strength values in the Mechanical Properties table must be adjusted by using the table below at temperatures&nbsp;...

The Influence of a Variety of Plasticisers on Properties of ... - iMedPub

incorporated into pvc and their influence on the properties of pvc, such as tensile properties, low temperature flexibility ... plasticiser increased tensile strength, modulus of elasticity and flame resistance of the pvc but with reduction of %.

analysis of non-linear elastic material properties of pvc-coated ...

has chosen the dense net model [6] to describe the behavior of pvc-coated Panama fabric. Based on the assumptions of this model, which requires only identification of the longitudinal modulus in the weft, F2, and warp, F1, directions,&nbsp;...