tile deck membrane plywood dimensions

Tiling a Deck | Professional Deck Builder | Hardscape, Staircases ...

1 Dec 2014 ... Fiberglass grating is a sturdy, drainable substrate option for exterior stone and ceramic tile. ... To minimize cracking and popped tiles, the TCNA always recommends the use of an uncoupling/waterproofing membrane over exterior plywood substrates. Andrew ... The panels are available in different sizes and thicknesses, but I typically use 4-foot by 12-foot by 1-inch-thick panels with a 1 ...

Extreme Deck Waterproofing System

The Extreme deck Waterproofing System combines the stand-alone waterproofing products Strataflex sheet and SubSeal liquid membranes to provide a ... stone, marble, slate, granite tile, pavers, brick, hardwood, manufactured wood, and commercial grade viny requiring integrated waterproofing. ... The Extreme deck Waterproofing System can be installed on decks and balconies of varying size.

Noble Deck - Noble Company

GENERAL INFORMATION. Noble deck may be used in areas over occupied space for waterproofing, crack isolation, and joint bridging. ... tile and Dimension Stone. Installations .... 3.4.a.2 plywood/Cementitious Backer Unit (CBU) decks: Wood expands and contracts at a significantly different rate than tile and cementitious ...

ALX Under Tile - Westcoat Specialty Coating Systems

Experience unmatched strength, durability, and design with ALX, Westcoat's waterproof deck coating system. Formulated ... ALX Under tile is a process for waterproofing plywood decks to receive tile, stone, or concrete. ... PRODUCT SPECS ...

Tile Membrane - USG

Description. DUROCK tile membrane is an easy-to-install, thin, waterproof, vapor-permeable underlayment and tilebacker in ... over virtually any floor that is designed to accept tile, including wood, concrete, poured gypsum floors, fully bonded ... For floor applications, precut full width of membrane to provide tight fit to room perimeter. ... All decking shall be T&G or back-blocked at unsupported edges.

Avoiding leaky exterior tile decks - Construction Specifier

1 Feb 2013 ... They are also used with large, heavy, thick, or 'ungauged' [varying thickness] tiles, where a thicker setting bed and a coarser aggregate may be required to achieve a ... Evidence of leaks due to a failed tile deck from improper installation of waterproofing membrane. ... The fasteners should only be long enough to attach it to the plywood beneath (and not to the joists), allowing it to 'float.'.

SubSeal liquid waterproofing membrane

SubSeal liquid is a stand alone waterproofing membrane. ... functions as a sealant, stand-alone crack suppressant and moisture barrier for interior and exterior applications of hard surface, resilient and wood flooring. ... Other Substrates: Exterior decks and balconies, ceramic and porcelain tile, stone, terrazzo, VCT/VAT, metal, painted and sealed floors and floors damaged ... Refer to waterproofing applications in the current TCNA handbook for additional installation guide lines. Sizes.

Building Waterproof Roof Decks | Professional Deck Builder ...

21 Jul 2014 ... My company specializes in repairing and waterproofing failed balconies, stairs, and roof decks, so I see on a near-daily basis the ... To prevent tile from cracking, an even stiffer substratewith deflection of less than L/720is required. ... the nominal dimension used for any tables and calculations should be reducedwhich would in turn reduce the allowable ... To meet Class A and one-hour fire-resistant-construction requirements, APA-rated plywood must be used.

Common Sources of Failure of Tile Decks on Wood Frame -

application, it was natural that we would look at other areas in which our material ( is a pvc roof membrane capable of ... of tile. Our expertise is in keeping the water out of living space beneath decks and balconies. The observations we present here are simply meant to ... thickness of at least 1-ΒΌ inches is required.

Exterior Installations of Tile and Stone Over Occupied ... - Laticrete

15 Aug 2013 ... Special consideration must be given to exterior installations of tile and stone which have occupied space (interior spaces requiring protection from water infiltration) beneath the installation, or, are on wood framed decks. ... construct and thickness requirements of wood floors. ... The primary roofing type waterproofing membrane, usually asphalt based or bituminous sheet materials, must ...

Technical Tip - Huber Engineered Woods

Code requirements related to both the installation of clay and concrete roof tiles and the roof decking required ... performance standard as other OSB and plywood panels that use APA as their third- party certification ... through are nail head size, fastener shank diameter, thickness of the sheathing and the specific gravity of roof ... membranes as long as they are compliant with building code. ZIP System ...

Deck Coatings: Waterproofing coatings for decks, balcony, parking ...

Discount waterproof coatings for decks, balconies, garages, walkway, basements and pools, waterproof, coating, deck ... These include Wood Based decks or Concrete decks, deck restoration systems, recoating systems and under-tile waterproofing waterproofing systems. ..... deck should be constructed of exterior grade plywood, 3/4" minimum thickness, tongue and groove, knot free on outside face.

How to Tile an Exterior Deck | Home Guides | SF Gate

On an exterior deck, factors such as temperature extremes, moisture levels and sun exposure must be factored into the preparation. ... Allow the wood surface to dry completely. ... Spread the thinset over the membrane the same thickness as the tiles with the flat side of a trowel, covering approximately a 3-square-foot area ...

Wood Porch With a Tile Deck | Professional Deck Builder | Outdoor ...

19 Jan 2017 ... A membrane installed between the tile and the substrate helps waterproof the assembly and keeps the tile from cracking. ... With a temporary plywood deck, the porch had served for several years as a makeshift shop and staging area for finishing the rest of the addition. ... The requirements of the Schluter specs were that the floor be sloped at least 1.5 degreeswhich works out to 5/16 ...

Roof Decks, A to Z Part 3: Structural Clay Tile and Plywood - RCI, Inc.

This article will explore features of 1) structural clay tile and 2) plywood. ... This thickness weighs approximately 18 pounds per sq ft. The term tile, as it relates to structur al clay tile roof decks, is often paired with ... membrane systems.

Essential Water Management in Exterior Tile Installations | schluter ...

There are various types of roof membranes, such as built-up roofing using asphalt binders, modified bituminous systems, and single-ply EPDM or PVC sheets. Most roof membranes are not suitable for the direct application of thin-set ceramic ...

Use of Noble Deck Over Plywood Substrates in ... - Noble Company

Noble deck is a composite sheet membrane made from Chlorinated Polyethylene (CPE), an extremely durable elastomer, with fabric ... Background: A note in the tile Council of North America's (TCNA) Handbook for Ceramic tile Installation lists several details with the ... a layer of exterior glue plywood (EGP), minimum thickness of at least 3/4 with wood joist spacing 16 O/C. Total thickness must be.

Barrier-Guard - Dex-O-Tex

Durable waterproofing system for ceramic tile, marble, quarry tile, and most composition floors and decking. ... Barrier-Guard's waterproofing membrane is molded across flooring surfaces, up onto bases, and over curbs without the use of any adhesive other than its own composition. ... be applied over new or existing concrete, wood, or plywood (after special preparation); Finished thickness of 100-150 ...